Home > Windows 7 > Windows 7 Not Booting After Clean Install

Windows 7 Not Booting After Clean Install


audiblackrs4Dec 17, 2009, 2:53 AM Change the primary boot device in your bios !! Windows XP is now loading for the first time. I know its my fault for not taking a recent Image of the HD, I have one from 9 mths ago so this is my last resort. in the first window where it shows you your new harddrive hit the little button at the bottom (advanced Setup). navigate here

You can also try the solutions from Windows 7. During installation, the Regional and Language Options window will appear.

The first section allows you to change the default Windows XP language and the default location. This may take a minute or two depending on your computer's speed.

34 Windows XP Clean Installation is Complete! Cause 2: The hard drive partition is damaged The hard drive's partition may become damaged because of disk write errors, power outages or virus attacks.

Windows 7 Not Booting After Clean Install

NTFS is more stable and secure than FAT and is always the recommended choice for a new Windows XP installation.

Using the arrow keys on your keyboard, highlight the line that says Format SishkeOct 24, 2014, 9:16 PM Well not sure what was the problem i decided to install win7 instead and all worked. If I remove HD boot from BIOS list I cannot boot from CD at all ?

Join over 733,556 other people just like you! Thanks TJGAU, Sep 2, 2015 #1 Sponsor managed Allan Joined: May 24, 2003 Messages: 7,559 Normally you get a 'press any key to boot from CD' message when you Thanks SOOOO much, DSTong!! Windows 7 Install Restart Loop If your computer will be on a network, this is how it will be identified to other computers.

Description and Symptoms The error messages, alerts, warnings, and symptoms below are tied to this error. Windows 7 Install Fails After First Reboot I can try remove HD, put in EXT USB case & use another PC. But I've tried 2 PSUs, 2 GPUs, 2 Hard drives, reseating CPU, replaced/RMA'd mobo, and tried running install with only 1-2 sticks of ram. If you're on a network, enter the workgroup name of that network here.

I tried "bootsect /nt60 SYS /mbr" as suggested on thread to restore Master Boot Record... Your Computer Will Restart Several Times During Installation I was getting the blinking cursor error everytime the installation did its first reboot. The Windows XP installation will now finalize. Before getting too excited, I decided to run a couple of benchmarks and high res games for hours with no problem.

Windows 7 Install Fails After First Reboot

xp install boot no from CD when restart during install Discussion in 'Windows XP' started by TJGAU, Sep 2, 2015. But after shutdown - NO boot solved USB (mouse&keyboard) stop working during installation OS W7 Pro 64b PC not booting any OS after new gpu installed Monitor wont start after first Windows 7 Not Booting After Clean Install Try another copy of xp o/s cd if still hangs try another hard drive if still hangs swap out drive process of elimination is key in this process. Windows 7 Won't Boot After Install Subsequent restarts or power cycles of the PC result in the same behavior.

When starting up your computer check the messages at boot to determine your motherboard's manufacturer. http://comvurgent.com/windows-7/how-to-install-windows-xp-on-windows-7-dual-boot.html Follow Us Facebook How To Fix Buy Do More About Us Advertise Privacy Policy Careers Contact Terms of Use © 2017 About, Inc. — All rights reserved. I figured maybe it was the SSD I was trying to install on to so I tried my other hard drive, still restarted during installation.I have 2 separate copies of windows I tried this after the installation completed and it worked. Windows Installation Starts All Over Again After Reboot

SishkeOct 23, 2014, 9:51 PM yes ofc i did cdrom first and hdd second this is the first time in 10 years i see this Related Resources Restart Loop during OS For all other Win OS I have set CD/DVD to be the first boot device followed by the HD, but of course the Geniuses at Microsoft had to screw this up If the machine is pointed toward the boot drive then the install routine should continue as normalHope this helps. http://comvurgent.com/windows-7/how-to-install-windows-7-from-dvd.html Sep 15, 2009 #4 kmr296 TS Rookie Topic Starter Ok i'll give that a shot.

I wanna intsall fresh version of XP SP3 on his PC and the problem starts after first restart of pc during installation. Windows 7 Keeps Restarting During Installation Fix: Use Easy Recovery Essentials Easy Recovery Essentials can fix many errors such as this automatically using its built-in Automated Repair option. even though C-A-D appears to power off laptop and re-start it...

In utter desperation I did one final search and found this post by DSTong.

Only a single hard drive is connected during the testing and install.  DVD boots up fine and begins to intall Win 7 64bit. All rights reserved. Had a HD fault & would not boot, after numerous retry, boot now successful but blu screen error after win starts. Windows 7 Install Restarts After Loading Files solved Windows 7 wont install on my new pc and it keeps rebooting and freezing help please :/ solved Windows 10, Keeps restarting on installation screen solved Windows 7 install keeps

Of course we know this because that is exactly what we're trying to do.

Confirm your knowledge that this is a system partition by pressing Enter to continue.

9 Confirm Partition Cheers, Dan Edited by DSTong Monday, November 16, 2009 10:13 PM add new info Marked as answer by DSTong Monday, November 16, 2009 10:21 PM Marked as answer by Andy Song Who would have thought such a low-tech solution would be the winner! weblink Could someone please solved Help with new computer build, trying to load Windows 7-Keeps restarting back into BIOS My windows 10 computer keeps freezing and restarting suddenly in weirdest ways possible.

System Disk=\Device\Harddisk0, Windows directory=D:\Windows, AutoChkRun=0, Number of root causes=1 Currently only workaround is to power on laptop from power off condition, select F9 to select boot from hard disk, and hope Newer Than: Search this thread only Search this forum only Display results as threads Useful Searches Recent Posts More... Sometimes Startup Repair could find my windows 7 install - other times it could not. Get the answer MikeLowreyApr 28, 2013, 2:12 PM Anyone else have any suggestions?*bump* knightdog56Apr 28, 2013, 2:21 PM Test computer with a known good power supply.

alexoiuMay 27, 2013, 6:51 PM At restart, press F8 and in the Boot menu try selecting the DVD drive or Removable and not the EFI DVD or EFI Removable.Or you can Looks like win install left a hook somewhere to intercept boot ??) then PE starts normal till the end where it gets blu screen same. I've googled my brains out trying to get an answer so this is my last resort. I let it sit for like an hour (even though I knew time wouldn't help).

When installing on the gateway there are no errors during the setup. This must be some weird compatibility problem.  I have attempted the installation 3 times with Win 7RC and with the working final release of  Win 7 Ultimate  4 times -with the Join our site today to ask your question. I will try & update with specific details this afternoon.

I tried suggested steps (changing boot sequence to hard drive only) and it sometimes boots, other times does not, and just hangs at a blank screen (a blinking cursor in top Some suggestions are to remove NV4*.* files & this may stop the corrupt driver from loading. I let it sit for like an hour (even though I knew time wouldn't help). Contents1 About "Error loading operating system"1.1 Description and Symptoms1.2 Symptom 1: "Error loading operating system" error screen on startup2 Causes of this Error2.1 Cause 1: The hard drive capacity is too big2.2

The next screen that appears is the Windows XP Licensing Agreement screen. Applicable Systems This Windows-related knowledgebase article applies to the following operating systems: Windows XP (all editions) Windows Vista (all editions) Windows 7 (all editions) ✎ Propose an edit Related Articles Fatal: This completes the final step of the Windows XP clean installation! Now I can only get into Safe Mode without the computer just freezing/shutting off/restarting on me.

Highlight the line with the newly created partition and press Enter to set up Windows XP on the selected partition.

Note: Even if you created a partition at the maximum size available, there will always be I happened to be sitting there when the red bar came up that says "windows will restart in 15 seconds or press enter to restart".