Home > Hard Drive > How To Connect Ide Hard Drive To Sata Motherboard

How To Connect Ide Hard Drive To Sata Motherboard


Onboard IDE Hard Drive (not present) 5. I just rebuilt my PC using an ASUS A7V880 Mobo, AMD AthlonXP 2800+ with 1Gb RAM. Followed solution 1 and seemed to do the trick - thanks! i mean like a memory stick that uses usb.. his comment is here

boot from dvd rom should be there Was this answer helpful? If I do so, the blue screen will come back again saying the HD can not be found. Thanks for reading. If you do get this far, expect a few errors when copy and expect it to be slow but hope that it works long enough to retrieve the files!

How To Connect Ide Hard Drive To Sata Motherboard

As long as your mobo supports both IDE and SATA and still has a connection for each, then you're fine. That fact that you are getting that far indicates that the hard disk is being detected (although C: could be mapping to a different drive such as your DVD). My system came up with the error "NTLDR missing" I did some settings in BIOS couldn't resolve the issue, Also tried to reinstall windows XP but HDD was been recognised in I have it set to ATA otherwise it BSODs when loading Windows XP 64 bit disk.

thanks!!!!!!!!!!!!!!!!! Proffitt Forum moderator / July 20, 2005 8:19 AM PDT In reply to: I'll be wary 2. Thank You! How To Make Ide Boot Instead Of Sata Can you send me a photo of the screen?

thanx… Reply hOU says: December 7, 2009 at 14:38 Worked for me on Acer Aspire One. Ide And Sata Drives In Same Computer WIN Xp getting installed properly. reboot from "broken HDD". Reply shawn says: April 3, 2011 at 21:33 thanks.

You must be sure to set the jumpers to master and slave, this should be identified by the diagram on the drive.I am using the appropriate cables for each drive.You will Ide Hard Drive Jumper Settings Thanks, Van Reply Anonymous says: November 9, 2011 at 12:22 Worked like a dream! Sponsor Latest Solutions Hacked By SA3D HaCk3D SSD Is The New RAM HOWTO: Move Google Mail (Gmail) Notes to iCloud HOWTO: Sync iCloud Notes Properly On All Your Devices ‘Online Sync I hope this helped and if you need additional help on the problem/something else feel free to ask/contact me.

Ide And Sata Drives In Same Computer

Just a black screen and nothing happens Reply albino lumi says: October 15, 2012 at 12:32 thank you so much , the information was very good , passing from AHCI to Thank you for posting this! How To Connect Ide Hard Drive To Sata Motherboard Before, the cd and dvd drives were e: and f:, the hd(when it was recognized) was still g:Not sure why it happened (I might try removing all emulation drives first and Sata And Ide Hard Drives Together admin • January 7th, 2015 at 4:33 am Hi Bryan Sounds like you may be at the point where a reinstall is in order.

Reply Kama says: March 24, 2011 at 13:56 Thankyou, changing ata in bios to compatablity mode solved the problem on Lenovo T61 Thinkpad. http://comvurgent.com/hard-drive/fastest-ssd-hard-drive.html Reply Bobi says: February 3, 2011 at 03:41 I turned off SATA and it worked for me..Thank you!!!!!! Reply Tea says: August 28, 2013 at 03:26 Thank you! I also tried making the boot from usb the primary boot device. Motherboard With Ide And Sata Ports

You can see some of my other blog posts on data recovery for instructions on doing this. Reply Nurul says: August 7, 2011 at 22:07 Thanks a lot! Had me baffled for a couple of days now. weblink The problem of reinstalling Windows on a SATA boot device still happens with XP, but almost the first message from Windows asks you to "press F6 to install a Raid controller".

Reply Rosco says: October 26, 2010 at 18:12 Hi Ktt, What's your make/model of laptop? What Are The Two Goals When Implementing A Raid Solution C:\>_ When I run Windows Pro with SP2, from the CD/DVD it runs windows set up, loading most if not all files and then comes to a blue screen that ends Flag Permalink This was helpful (0) Collapse - Same problem here...

It should be sent to a data recovery lab for recovery.

Reply Jason Egan says: July 19, 2010 at 16:25 Thank you so much! Flag Permalink This was helpful (0) Collapse - It's fine by ackmondual / July 22, 2005 11:48 AM PDT In reply to: Mixing SATA and IDE drives in a system? A lot of times when I do remote repairs (by phone, email or my private discussion board) the user does not have an XP disc and this complicates things further for How Many Hard Drives Can Be Connected To A Single Ide Cable Every week I fix unbootable XP computers.

Reply Rosco says: September 23, 2010 at 09:30 Hi Johnorean…sorry for the late reply… Do you still have this issue? When you reach the Welcome Screen and choose to install Windows you are presented with the error “Setup did not find any hard disk drives installed in your computer” similar to Ty. check over here I've looked all over but couldn't find anything related to this issue online.I finally read your post and remembered that was how I had altered it before(accidentally, about a year and

Then connect up your original drive as secondary so that both of them are in the pc at the same time. After inserting the XP setup CD, it is unable to detect the presence of a hard disk. OS - Windows XP SP3.